Cost Comparison
The table below shows a cost comparison guide between Perfo, concrete and tarmac hard standings. Costs are approximate and include the cost of ground preparation,
equipment hire, materials and labour, where required, as well as VAT. The costs for the concrete and tarmac alternatives were prepared by an independent paving
expert and are intended as an approximate guide.
System |
Area |
Cost per m² |
Total Cost |
PERFO* |
30 m² |
£17.63 |
£529 |
100 m² |
£16.45 |
£1,645 |
CONCRETE** |
30 m² |
£45.75 |
£1,375 |
100 m² |
£35.25 |
£3,525 |
TARMAC*** |
30 m² |
£56.75 |
£1,700 |
100 m² |
£45.50 |
£4,550 |
* includes cost for 1 day hire of a compacting plate for 30m² or a vibrating roller for 100 m².
No professional labour required.
Ground excavation not normally required.
Note: The cost per m² of Perfo is reduced for areas greater than 100m².
** based on costs for 150 mm layer of concrete on a sub-base and equipment hire as required
*** based on 150 mm sub-base, 70 mm base course and 25 mm wearing course and use of professional
labour and equipment as required.
Source: S2T Perfo-UK / Concrete & Tarmac www.pavingexpert.com
|
We would be pleased to supply a specific quotation for your particular requirement.
|
